They Provide Clean Operation In Mixing Systems
The date of:
2021-07-29
viewed:
12
New Magnetic Couplings From Miki Pulley “Mechanically Isolate” Shafts And Motor – They Provide Clean Operation In Mixing Systems
Magnetic couplings from Miki Pulley are ideal for machine designs involving food, pharmaceutical and laboratory applications requiring clean, non-contact connection between motor and shafts.The mechanically isolated magnetic coupling transmits torque through the air. This occurs through both input and output hubs of the coupling which contain powerful rare-earth neodymium magnets. These magnets create a magnetic field that transmits torque through plastic, glass, aluminum and other minimally ferrous materials without physical engagement.Miki Pulley’s Magnetic Coupling’s non-contact design is particularly important where cleanliness and motor isolation is required in the mixing system design. The coupling is clean and operates with no vibration. There is no dust, debris or mechanical wear using this coupling compared to conventional couplings. Also important, this coupling has a “softer” start/stop function compared to conventional, general purpose couplings. In addition to mechanically isolating the connecting shafts and motor, the coupling also isolates thermal and electrical occurrences.These magnetic couplings have an intended engineered torque limit at a specific air gap. The transmittable maximum torque may be adjusted by increasing / decreasing distance between coupling hubs. Depending on model, size, and installed air-gap, the magnetic couplings’ maximum torque limit may be exceeded without mechanical damage. The hub simply slips to the next magnetic pole, without noise or mechanical wear. Magnetic Coupling Also Acts As A Torque LimiterWhile the magnetic field between the two hubs will transmit rotational force, it can also act as a torque limiter in an over-load event. The transmittable-torque and slip-torque may be metered by adjusting the distance between the hubs. After slipping, the hubs will re-engage each other and continue to transmit torque. This feature produces no mechanical wear on components. Miki Pulley Magnetic Couplings are available in different configurations including shaft-to-shaft, parallel cylinder, perpendicular and well as stainless and plastic clad versions for food/washdown environments.Basic Miki Pulley Magnetic Coupling specifications are:4 different models in multiple sizes availableTorque: 2.66 in-lbs. to 1610 in-lbs. (0.3 Nm to 182 Nm)Bore size range: 8mm - 55mm on butt shaft configurations
Hot News
/
Related to recommend
2025
-
01
-
24
Click on the number of times:
0
...
Appia Announces Outstanding Total Rare Earth Oxide (TREO) Results From Its Diamond Drilling Program at PCH Project in Goias, Brazil source:resourceworldAppia Rare Earths & Uranium Corp. (the ...
2025
-
01
-
23
Click on the number of times:
0
...
source:resourceworldLack of available infrastructure has long been a perceived impediment to the development of Commerce Resources Corp.’s [CCE-TSXV, CMRZF-OTCQX, D7HO-FSE] Ashram Rare Earth Deposit i...
2025
-
01
-
23
Click on the number of times:
0
...
source:Nagoya Institute of TechnologyHeterogeneous catalysts speed up chemical reactions by being in a different state than the reactants. They are efficient and stable, even under challenging conditi...
2025
-
01
-
21
Click on the number of times:
0
...
source:SMALL CAPSExploration company Marmota (ASX: MEU) is set to begin a maiden drilling campaign at the Muckanippie heavy minerals-titanium project in South Australia which yielded bonanza assays in...