Nd,Th:LaAlO3 Shows Promising Potential in High-Energy Pulsed Lasers
The date of：
2022-08-01
viewed:
1
Pulsed lasers, a crucial component of the laser industry, are continuously developed to produce higher repetition frequencies and greater intensity. Recently published research findings from the Shanghai Institute of Optics and Fine Mechanics at the Chinese Academy of Sciences exhibit a crystal with promising pulsed laser properties. Research efforts led by the group of Professor Yin Hang and published in Optics & Laser Technology have demonstrated the first laser operation of perovskite oxide LaAlO3 doped with 0.1 at% Nd ions and 0.2 at% Th (Nd,Th:LaAlO3).Pulsed lasers have been used extensively in a variety of research fields. Some examples include:Interaction of high-field lasers with materialsLaser pulses are described by their pulse widths, repetition rates, and pulse energies. Short pulse widths and extremely high peak powers of pulsed lasers have benefited the applications above.The primary materials in high-energy pulsed lasers are rare earth-doped crystalline materials. The high damage threshold of such bulk crystals is conducive to pulsed laser operation.Theoretically, a longer fluorescence lifetime will result in a higher repetition rate and more pulsed energy output. The output frequency can also be increased by high thermal conductivity.While several crystals have been used for pulsed lasers, they have had limited success for high energy emission. For example, due to its greater emission cross section and shorter lifetime, Nd: YAG is less effective than doped crystals such as Nd:LuAG and Nd:glass. Because of their structural features, disordered laser crystals such as Ca3Nb1.5Ga3.5O12 are not typically very thermally conductive and are therefore unsuitable for high-energy applications. New crystals must be discovered to satisfy the demands of repeated frequency high-energy lasers.Crystal Growth and Laser OperationProfessor Yin Hang's research group used the Czochralski method in an iridium crucible to grow a Nd,Th:LaAlO3. A pure LaAlO3 substrate was used as a seed.ThO2 powders were added to the melt containing high-purity Al2O3, La2O3, Nd2O3, to achieve doping concentrations of 1 at. % and 0.2 at. %. The crystal was grown for two days before being cooled for 20 hours at room temperature.From the base product, domain-free crystals of a particular size are cut for laser use. After cutting and polishing, the crystal maintained a single stable domain, and a 3 mm x 3 mm x 4.5 mm crystal with a domain-free laser face was produced. X-ray diffraction analysis and optical microscopy characterized the Nd and Th co-doped LaAlO3 crystal.In the laser experimental setup, a straightforward plano-concave cavity construction was used. The pump source used was a fiber-coupled laser diode (LD) with a center wavelength of 793 nm. The Nd,Th:LaAlO3 crystal received the pump light after being focused by a fiber output focusing mirror. An optical spectrum analyzer and a power meter were used to measure the laser's output power and spectrum, respectively.Absorption and emission data from the experiment show absorption and emission of the pump light at different NIR wavelengths.Under 793 nm LD excitation, laser operation was realized. Laser output was obtained at a slope efficiency of 36%, and the corresponding optical-to-optical efficiency was at 34%. Laser output efficiency will increase with coating and greater polishing.Fluorescence lifetime data were also recorded. Up to 317.7 seconds of fluorescence lifespan with a saturated flux of 5 J/cm2 was measured. Nd,Th:LaAlO3 also has higher thermal qualities than neodymium glass thanks to its high thermal conductivity of up to 10.3 W/mK at 25 °C.Thorium doping stresses the crystal, immobilizing the domain structure. It then selectively slices the crystal to produce a domain-free crystal that extends in the direction of the dopant.Overall, LaAlO3 is a promising gain medium for high-energy pulsed lasers. Further development and conditioning of the laser control mechanisms should improve the performance of the beam features.
Hot News
/
Related to recommend
2025
-
01
-
02
Click on the number of times:
0
source:TOHOKU UNIVERSITYElectrocatalysis is a key technology for sustainable energy, and understanding how catalysts work is crucial for improving their performance. One of the challenges in using pla...
2024
-
12
-
31
Click on the number of times:
0
source:Tohoku UniversityAn international group of researchers has developed a novel approach that enhances the efficiency of the oxygen evolution reaction (OER), a key process in renewable energy tech...
2024
-
12
-
30
Click on the number of times:
0
source:phys.orgA research team has developed high-performance diamond/ε-Ga2O3 heterojunction pn diodes based on ultrawide bandgap semiconductors, achieving breakdown voltages exceeding 3 kV. This work...
2024
-
12
-
27
Click on the number of times:
0
Dinuclear Rare-Earth β-Diketiminates with Bridging 3,5-Ditert-butyl-catecholates: Synthesis, Structure, and Single-Molecule Magnet Properties source:ACS PublicationsAbstract ImageThe dinuc...